Uneven transverse wall thickness of blow molding products

Date:2019-08-08Views:0

Cause of occurrence:

①Parison extrusion skew 

②The temperature difference between the mould sleeve and the mould core is large. 

③The shape of the product is asymmetrical 

④The blow molding ratio of the Parison is too large.

Solution measures:

①Adjust the deviation of the gap width of the die so that the thickness of the blank wall is uniform. 

②Lifting or lowering the heating temperature of the mould sleeve, and improving the internal and external temperature deviation of the mould 

③The parison is pre-clamped and pre-expanded before the mold is closed so that the parison is suitably offset in the thin-wall direction 

④Reduce the blow molding ratio of parison



Next:Orange peel patterns or hemp spots appear on the surface of blow molding products

Honor

Focus on Blow Molding Machine R & D and manufacture for 30 years

WeChat
Copyright © ZHEJIANG TONVA PLASTICS MACHINE CO.,LTD All Rights Reserved    浙ICP备05042116号    浙公网安备33102102331231号    Power by:Galaxyinfo    TONVA